How to use mC-Label3 Printer with Athena’s Visitor Management System App

Modified on Wed, 24 Jan 2024 at 06:51 PM

Step by step process:

1.) Download the app.

2.) Turn on the printer

3.) Connect to the printer via Bluetooth

4.) Open the app and follow what’s on the video -

a.) .Search Printer 

b.) Click Printer Settings 

c.) Print Media Settings 

d.) Die cut label 

e.) Gap sensor 

f.) Adjust Paper Guide - Click next 

g.) Load Die cut label roll - Click next 

h.) Adjust sensor position - Hit Apply 

i.) Close the printer cover 

j.) Test Print 

k.) Check if the test print result is correct 

l.) Cut in the correct position 

m.) Setup complete - Hit OK 

5.) Open the VMs app and try to print.

6.) Make sure there is a blue light in front of the printer.


7.) Download Athena Visitor Management App to test printing from it.

8.) Here are the steps to register the printer in Athena VMS once all the above is complete. -

a.) Select Patient or Visitor 

b.) Log in and type in password 

c.) Click Printer Settings 

d.) Click Def ault Printer and switch it to Label Printer

e.) Click Label Printer Settings

f.) Choose Bluetooth 

g.) Confirm Yes 

h.) Click 2” (384dots) 

i.) Click High when Open 

j.) Click Save 

k.) Test it 

l.) Enter room number 


m.) Print 

n.) Result 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article