Configure HSRP or blackbody on Apple iPad

Modified on Fri, 26 Mar 2021 at 11:12 AM

HSRP or Blackbody Calibration for Apple iPad App

  1. Open Temperature Detection App from iPad Pro, and step out of view of the camera if the app is not installed goto Temperature Checking Detector App from Apple App Store and download it.

  2. After you open the app, You will hear a message, “standby for HSRP Configuration”. The system will find the HSRP on the screen, and identify it with a black box around the blackbody (HSRP)

  3. You will then hear “HSRP found, now scanning for human temperatures”, step into the field of view at this point and you should see a temperature reading. 

  4. Call Athena if you have any questions about configuration and or to check your system is fully configured: 833-928-4362 x 2 (Monday-Friday; 8am - 6pm PT)

    NOTE: If the image is unclear, spin the lens of the camera to adjust the focus.

Note if the Temperature Detector App does not find the Blackbody (HSRP) automatically you may pinch the screen with two fingers to manual place the black box around the HSRP box to configure the system.  

Also note if you wish the system to find HSRP automatically in case the system is moved during the night or bumped during the day you may set in settings -misconfiguration- to ON. which will auto find HSRP even if system is moved after the first configuration is set.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article